TheraGlow Mask2Go+ LED Light Therapy Face Mask
- Sits just off the skin, so it stays cool, clean and comfortable
- Sits just off the skin, so it stays cool, clean and comfortable
- Red and near infrared together in one mode, plus blue and yellow
- Barely there at 3.28 oz, with an adjustable head strap
- Sessions end on their own at 10, 15, 20 or 30 minutes
Red with near-infrared, 630 and 850 nm. Why that matters
Red light at 630 nm is absorbed in the outer layers of the skin, while near-infrared at 850 nm passes further in. Running both in the same mode means one session reaches two depths. And because the mask sits just off the face, the light spreads evenly across it instead of pooling where a shell presses down.
Depths shown are illustrative. Light supports the skin's normal renewal; it does not treat, cure, or prevent any condition.
Be first to know when it's back.
Please enter a valid email address.
You are on the list.
We will email you the day it is back in stock.
Cannot wait? Contact our team at support@kovelongevity.com.
Not sure it fits your stack? Take the two minute quiz and we will map a starting point around you.
Description
The TheraGlow Mask2Go+ is an open lattice LED mask that sits just above the skin, held in place by an adjustable head strap. Inside, 54 diodes, each holding four light beads for 216 in all, run three modes: red at 630 nm paired with near infrared at 850 nm, blue at 415 nm, and yellow at 590 nm. Because the shell does not press on the face, air moves freely and the mask stays comfortable through a full session.
At 3.28 oz it is easy to forget you are wearing it. A small controller sets low, medium or high brightness and a 10, 15, 20 or 30 minute session, then switches the mask off, and its 2600 mAh battery recharges over the included USB-C cable. Therasage suggests three to five sessions a week for four weeks as one full cycle.
Is this right for you?
You'll get the most from it if
- You dislike the feel of silicone pressed on your face; this one sits just off it.
- You want red and near-infrared in the same session without switching modes.
- You want a mask light enough to wear while you make coffee or answer email.
- You like a routine with a clear end point; each session switches off on its own.
Maybe look elsewhere if
- You want a wider range of colors, including green and cyan; the TheraGlow Mask2Go offers eight.
- You want to work the jawline and cheeks by hand with microcurrent and massage; the TheraSculpt does that.
Specifications
| Format | Open lattice LED face mask that sits just off the skin, with handheld controller |
|---|---|
| Light modes | Red 630 nm with near-infrared 850 nm · Blue 415 nm · Yellow 590 nm |
| LEDs | 54 four-in-one diodes (216 light beads) |
| Brightness | 3 levels: low, medium, high |
| Timer | 10, 15, 20 or 30 minutes, then auto shut-off |
| Battery | 2600 mAh rechargeable lithium-ion |
| Power | 4.7W; charges at DC 5V 1A over USB-C |
| Size | 8.3 × 8.3 × 6.3 in |
| Weight | 3.28 oz (93 g) |
| Materials | Liquid silicone and ABS plastic |
| In the box | Mask, controller, adjustable head strap, USB-C charging cable, user guide |
Wavelength and irradiance figures are conservative estimates based on lab spectroradiometer measurements; real-world output varies with distance and placement.
How to use
- Before you startCleanse and dry your face; skip retinol, acids and vitamin C serums before a session
- First useCharge fully, then run a 10 minute test on your forearm and check for redness
- Session10 to 30 minutes; short press Mode to change the light, long press it to set the timer
- Frequency3 to 5 times a week for 4 weeks makes one full cycle
- Good to knowWipe the inside with a damp cloth after use; keep the controller and charging port dry
Shipping & delivery
Free shipping within the United States on every order. Most orders ship within a few business days, and you will receive tracking as soon as your order is on its way. Larger items may ship freight with a delivery appointment.
Warranty & returns
1-year limited warranty.
Not the right fit? You have 60 days from delivery to send it back. Reach out to our team, we will email you a prepaid return label and the right address, and refund you once it arrives. Items need to come back in their original packaging. Prefer to exchange it for something else? We handle that at no extra cost.
Cancel free of charge any time before your order ships. If anything arrives damaged, send us photos of the item, the box and the SKU within 24 hours and we will sort it out for you.
See our Return Policy for full details.
Why it earns a place in the stack. Most LED masks press silicone against your face. The Mask2Go+ is an open lattice that sits just above it, so skin can breathe, there is less to wipe down, and at 3.28 oz it is light enough to wear while you get on with your morning.
Choose options
Frequently Asked Questions
What do the three light modes on the Mask2Go+ do?
Does the Mask2Go+ touch my face?
How is the Mask2Go+ different from the Mask2Go?
How long and how often should I use the Mask2Go+?
Can I wear skincare under the Mask2Go+?
How do I clean the Mask2Go+?
Is there anyone who should not use the Mask2Go+?
From the Journal
Longevity Devices for Beginners: How to Build Your First Home Stack
Red Light Therapy: What the Evidence Actually Says
Cold Plunge Benefits: A Practical Guide to Cold Exposure
Infrared Saunas and Heat Therapy: What to Know
PEMF Therapy: How It Works and What the Evidence Shows
Light and Sound Brain Wellness: How It Works and What the Science Says
Biological Age, Explained: What It Is and How Testing Works
Build Your Own Stack
Not sure where to start? Take our Build Your Own Stack quiz. Answer a few questions and we'll map a starting point built around you, in about two minutes.
Send us your goals
We'll reply with a stack matched to your goals.
Our approach
Every product earns its place.
No single thing changes your biology on its own. What matters is the system, and whether each piece earns its place. Here is how a device makes it into Kove.
01
Start with the evidence
Where there is research behind how something works, we read it. We look at the real mechanism a device relies on, like the wavelength, the frequency, or the dose, and whether the evidence holds up. Substance comes before marketing, and we are honest about how strong that evidence is.
02
Separate mechanism from marketing
A claim is not a mechanism. We check a device's real output against its stated one: does the panel emit the 660 and 850nm it advertises, at the irradiance that makes those numbers matter? The marketing language gets set aside. The measurable spec is what we judge.
03
Verify build and dose
Even a good idea does nothing if the hardware is weak. We confirm the output is consistent, the dose is usable in a real daily routine, and the build holds up over years, because a device only helps if it lasts as long as the habit.
04
Held to one standard
What clears every step earns its place in the system, held to the same standard as everything else. That consistency is what you can count on.
