ALMAG+ PEMF device: control unit and four linked coils

ALMAG+ coil layouts: two by two pad and a straight row of four coils

ALMAG+ parts: control unit, emitter and four coils

ALMAG+ control unit with mode lights, mode button and start button

ALMAG+ field indicator held to a coil, with the N faces of the coils shown

ALMAG+ Targeted PEMF Device

Name: ALMAG+ Targeted PEMF Device
Brand: Almagia
SKU: ALM-ALMAG-PLUS
Price: 789.0 USD
Availability: InStock
Rating: 5.0 (2 reviews)

5.0 · 2 reviews

$789.00

Targets one area: four coils sit right where you place them

Targets one area: four coils sit right where you place them
Simple to run: pick a mode and press start
Hands off timing: 20 minute sessions stop on their own
Fits any spot: coils lie in a row or fold into a pad

In stock. Ships free in the US. No sales tax.

Not sure it's the right fit? Call (888) 876-0725, chat with us, or book a free call.

and email me the product.

Price Beat60-day returns2-year limited warranty Support 7 days

Not sure it fits your stack? Take the two minute quiz and we will map a starting point around you. Why buy from Kove

Recommended pairing

The ALMAG+ works on one area at a time. The Pro Mat adds a full body session lying down.

ALMAG+ Targeted PEMF Device

$789.00

Vasindux PEMF Pro Mat

$1,426.75

Description

Four linked coils on one flexible emitter, placed on one area at a time
Three modes: two with a traveling field, one with a stationary field
Every session runs 20 minutes and stops on its own
Runs on standard 120 V household power

The ALMAG+ is a compact PEMF device built for one area at a time. A small control unit drives a flexible emitter of four linked coils. Lay the coils in a row along the back or a leg, or fold them into a two by two pad for a knee or a shoulder, and hold them in place with the included fastener and straps.

There is very little to learn. Choose one of three modes, press start, and the unit times the session for you: 20 minutes, a short beep every five, and an automatic stop at the end. Modes 1 and 2 run a traveling field that moves from coil to coil, at two strengths. Mode 3 runs all four coils together as a stationary field.

PEMF is used to support relaxation, circulation and general wellness. It rewards consistency more than intensity, and a device this simple is easy to keep using. This product is not intended to diagnose, treat, cure or prevent any disease.

Key details

The ALMAG+ pairs a control unit with one emitter of four linked coils on a 3.9 ft cable. Field strength at the coil surface is about 20 millitesla in Mode 1, 8 in Mode 2 and 6 in Mode 3. Sessions are fixed at 20 minutes. The US version runs on 120 V, 60 Hz power, draws no more than 55 VA, and the control unit and emitter weigh 1.8 lb together.

Is this right for you?

You'll get the most from it if

You want PEMF on one area at a time, such as a knee, a shoulder or the lower back.
Simple matters: three modes, one start button and a session that times itself.
You want something small that packs away in a drawer between sessions.

Maybe look elsewhere if

You want a whole body session lying down; a full body PEMF mat suits that better.
You want many programs and several emitters; the ALMAG-02 system is built for that.
You want a battery powered device to use away from an outlet; this one plugs into the wall.

Specifications

Format	PEMF device, control unit + flexible emitter
Emitter	4 linked coils on a 3.9 ft cable
Modes	3: two traveling field, one stationary field
Field at the coil surface	Mode 1 about 20 mT, Mode 2 about 8 mT, Mode 3 about 6 mT
Pulse rate on US power	7.5 Hz in Modes 1 and 2, 120 Hz in Mode 3
Session	20 minutes, automatic stop
Daily limit	40 minutes in all per day, with at least 8 hours between sessions
Operating cycle	Up to 8 hours of 20 minutes on, 10 minutes idle
Standby	Goes to standby 5 minutes after a session ends and remembers the last mode used
Surface temperature	Coils 41 °C (about 106 °F) at most, control unit 45 °C (113 °F) at most
Power	120 V, 60 Hz, 55 VA maximum
Cables	1.3 ft between the two coil pairs, 6.6 ft power cord
Dimensions	Control unit 5.6 x 3.0 x 1.4 in, emitter 35 x 3.5 x 0.7 in
Weight	1.8 lb, control unit and emitter together
Electrical safety	Class II (reinforced insulation), type BF; control unit IP41, emitter IP42
Operating range	50 to 95 °F room temperature
Service life	5 years on average
Warranty	2-year limited warranty
In the box	Control unit with emitter, fastener, two straps, magnetic field indicator, manual
Manual	ALMAG+ user manual (PDF)

How to use

Set upPlug in the control unit and place the coils on one area, with the face marked N toward the body; after cold shipping, let it stand at room temperature for 2 hours first
ChooseMode 1, 2 or 3 with the mode button, then press start
Session20 minutes, on bare skin or over clothing; the unit beeps and stops on its own
FrequencyOnce or twice a day, at least 8 hours apart and no more than 40 minutes a day in all. The manual's first course starts at 7 to 10 minutes and builds to 20
Good to knowNot for use during pregnancy or with an implanted pacemaker. Read the manual and ask your doctor before you start

Shipping & delivery

Free shipping within the United States on every order. Most orders ship within a few business days, and you will receive tracking as soon as your order is on its way. Larger items may ship freight with a delivery appointment.

Warranty & returns

2-year limited warranty.

Not the right fit? You have 60 days from delivery to send it back. Reach out to our team, we will email you a prepaid return label and the right address, and refund you once it arrives. Items need to come back in their original packaging. Prefer to exchange it for something else? We handle that at no extra cost.

Cancel free of charge any time before your order ships. If anything arrives damaged, send us photos of the item, the box and the SKU within 24 hours and we will sort it out for you.

See our Return Policy for full details.

Cost per session

Used 4 times a week for 3 years

At home

$1.26

Clinic

$50 to $150

When to use it

Morninga short program to start
After traininglie down on recovery days
Eveninga gentle program to unwind

Why it earns a place in the stack. The ALMAG+ covers what a full body mat cannot: one area, with the coils sitting right on it. Four linked coils, three modes and a fixed 20 minute session keep it simple enough to use every day. It is the small, targeted piece of a PEMF routine.

ALMAG+ Targeted PEMF Device

$789.00

5 stars: 2 (100%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

Great portable device

I’ve developed a knee problem, and I’m using the Almag+ to manage pain and decrease inflammation to promote better healing with my knee. I love the portability, the ease of use and the three settings on this device.

ALMAG+ PEMF Therapy Device

I was considering purchasing Almag for about 2 years. My major concerns were:
i) whether device made in Russia (220 V) will work in the USA;
ii) whether device made with general consumer in mind will have high enough penetrating power.
Now, Elamed makes devices that can be used in the USA.
I decided to risk and buy Almag+ . Another reason for me to purchase Almag was that I had severe low back pain and sciatic problems in the past 3 month before I purchase Almag+. Usually, I had them ones every two years.
First, I started low back pain treatment at setting 3 for 5 min and increased to 10 min on day 2. I placed emitters or inductors, as Elamed called them the hand book, along lumbar and sacrum areas. First impression is that treatment increases pain from 3-4 to 5-7 on 1-10 scale. After 5 min post treatment pain disappeared and reappeared in about 10-12 hrs. I decided to change protocol of treatment and use 3 cycles of the treatment with 1-day break in between: 5min on setting 3 flowed by 5 min on setting 1. Additionally, I placed inductors along sciatic nerve path and used device for 5min at setting 1. After 2 weeks of treatment completion, I feel no pain. It seems, it is important to feel enhanced pain during treatment. I have feeling that if no pain enhancement, you will have no effect. Move inductors up or down, or a little right or left. Warring! Indeed, treatment can increase or decrease blood pressure. After treatment, my systolic blood pressure has decreased about 15mm. However, my husband did not want use device even on a low setting. His blood pressure has increased 25 mm every time when he used it. Just recently, I have discovered that Almag+ helps me to relieve migraine headaches. I placed 4 inductors onto collar zone and used device for 5-10 min on setting 3 depending on severity of pain. I consider buying another handheld device to treat migraines. Several friends and neighbors told me that they used Almag-01 for years and very happy with the results of treatment. Bottom line, Almag+ is good investment. It does help.

Frequently Asked Questions

How do you use the ALMAG+?

To use the ALMAG+, plug in the control unit, place the four coils on one area with the face marked N toward the body, choose Mode 1, 2 or 3 and press start. The session runs 20 minutes, beeps every five minutes and stops on its own. The coils can sit on bare skin or over clothing.

What are the three ALMAG+ modes?

The three ALMAG+ modes set the type and strength of the field. Modes 1 and 2 run a traveling field that moves from coil to coil, at about 20 and 8 millitesla at the coil surface. Mode 3 runs all four coils together as a stationary field at about 6 millitesla. Every mode runs for 20 minutes.

Does the ALMAG+ work on US power?

Yes, the ALMAG+ we ship is the US version for 120 volt, 60 Hz household power. It draws no more than 55 VA and plugs into a standard outlet. It has no battery, so it needs an outlet for every session.

Who should not use the ALMAG+?

Do not use the ALMAG+ during pregnancy or with an implanted pacemaker. The manual lists further conditions, including heart rhythm disorders, bleeding disorders and malignancies, so read it in full and ask your doctor before you start.

How do you check that the ALMAG+ is working?

To check that the ALMAG+ is working, start a session and hold the magnetic field indicator that comes in the box to each coil on the side marked N. The light in the middle of the indicator glows when that coil is producing its pulsed field. The unit also checks itself: a beep with the Mode 2 light blinking means a broken emitter wire, and a beep with the Mode 3 light blinking means a coil circuit fault. In either case, stop and contact our team.

How long and how often can you use the ALMAG+?

The ALMAG+ manual sets a limit of 40 minutes in all per day, once or twice a day, with at least 8 hours between sessions. Each session runs up to 20 minutes, and you can end one sooner with the start/stop button. The manual's first course starts with 7 to 10 minute sessions and builds up to 20 minutes over about three weeks, with a one day break after each six days.

How do you clean and store the ALMAG+?

To clean the ALMAG+, wipe the control unit and coils with a cloth dampened with a mild disinfectant, such as a 0.5 to 1% chlorhexidine solution, and keep liquid out of the housings. Then wipe them with a cloth dampened with water and wrung out, and let them dry. Store the device in its box in a dry room, out of direct sunlight, and do not twist or bend the cables.

How big is the ALMAG+ and how long does it last?

The ALMAG+ control unit measures about 5.6 x 3.0 x 1.4 in and the emitter about 35 x 3.5 x 0.7 in, and the whole device weighs under 1.8 lb. The coil faces stay at 41 °C (about 106 °F) or below during use. The maker gives an average service life of 5 years, and the unit goes to standby 5 minutes after a session ends.

Shop by Category

Red Light & Light Therapy

Red and near-infrared panels you can fold into a morning or evening routine, no appointment needed.

Cold Plunge

PEMF

Infrared Sauna

Brain & Light

More categories:Infrared Mats Air Purification Replacement Filters & Parts Browse all

From the Journal

Read all Journals

Longevity

What Is Biological Age, and How Does Testing Work?

Build Your Own Stack

Not sure where to start? Take our Build Your Own Stack quiz. Answer a few questions and we'll map a starting point built around you, in about two minutes.

Email

Send us your goals

We'll reply with a stack matched to your goals.

buildmystack@kovelongevity.com

Book a call

Free 30-min consult

Pick a time and we'll walk through it together.

Book a 30-min Call

Call us

Talk it through

Reach our team, 7 days a week, 9-5 EST.

(888) 876-0725

Our approach

Every product earns its place.

No single thing changes your biology on its own. What matters is the system, and whether each piece earns its place. Here is how a device makes it into Kove.

01

Start with the evidence

Where there is research behind how something works, we read it. We look at the real mechanism a device relies on, like the wavelength, the frequency, or the dose, and whether the evidence holds up. Substance comes before marketing, and we are honest about how strong that evidence is.

02

Separate mechanism from marketing

A claim is not a mechanism. We check a device's real output against its stated one: does the panel emit the 660 and 850nm it advertises, at the irradiance that makes those numbers matter? The marketing language gets set aside. The measurable spec is what we judge.

03

Verify build and dose

Even a good idea does nothing if the hardware is weak. We confirm the output is consistent, the dose is usable in a real daily routine, and the build holds up over years, because a device only helps if it lasts as long as the habit.

04

Held to one standard

What clears every step earns its place in the system, held to the same standard as everything else. That consistency is what you can count on.

Read the Kove Standard

Ask AI for a summary of Kove Longevity

ALMAG+ Targeted PEMF Device

Key details

You'll get the most from it if

Maybe look elsewhere if