BioLight Arc System Red Light Therapy Bed
- Splits into a treatment table and a standalone panel
- Splits into a treatment table and a standalone panel
- Choose your red and near-infrared wavelengths at order
- Adjustable intensity, pulsing from 1 to 10,000 Hz
- Wheels and an electric motor make repositioning easy
How the Arc moves between three setups
A fixed bed gives you one position. The Arc separates into a treatment table and a standalone panel, and a motor plus wheels let you move between a lie-down, seated, or standing session in seconds. Choosing your red and near-infrared wavelengths at order means the same system can favor surface work or deeper tissue.
Red and near-infrared light supports normal cellular processes; it does not treat, cure, or prevent any condition.
Made to order. Ships by freight, about 12 weeks from order to delivery. Freight is calculated at checkout, typically $1,200 to $2,900 depending on your address.
Not sure it's the right fit? Call (888) 876-0725 or book a free call.
Bank wire accepted at checkout on orders of US$5,000 or more. Your order ships once the transfer lands.
Be first to know when it's back.
Please enter a valid email address.
You are on the list.
We will email you the day it is back in stock.
Cannot wait? Contact our team at support@kovelongevity.com.
Not sure it fits your stack? Take the two minute quiz and we will map a starting point around you.
Recommended pairing
The Arc covers the whole body in red and near-infrared during a 10 to 20 minute table, seated, or standing session at up to about 60 mW/cm². The Beam then concentrates over 100 mW/cm² on one knee, shoulder, back, or face for a stronger, focused dose while you read or stretch.
BioLight Arc System Red Light Therapy Bed
$25,000.00
BioLight Beam Targeted Red Light Therapy Device
$2,499.00
Description
The Arc System is a full-body red and near-infrared bed that splits into two independent pieces: a treatment table and a standalone panel. Built-in wheels and an electric motor make repositioning simple, so one system can serve a table session, a seated session, or a targeted standing setup.
Wavelengths are chosen at order from the 620 to 750 nm red and 800 to 1,000 nm near-infrared ranges, and sessions run 10 to 20 minutes with adjustable intensity and pulsing from 1 to 10,000 Hz. It runs on standard 110V or 220V power.
The Arc is made to order and ships by freight. Plan about twelve weeks from order to delivery, and reach out before ordering so we can confirm the details together.
Key details
BioLight Arc System Red Light Therapy Bed is a full-body red and near-infrared bed that splits into a table and a standalone panel. It holds 2,992 LEDs, 1,408 in the panel and 1,584 in the bed, at wavelengths chosen at order from 620 to 750 nm red and 800 to 1,000 nm near-infrared. Output reaches up to about 60 mW/cm², pulsing runs from 1 to 10,000 Hz, and sessions last 10 to 20 minutes. The panel measures 75.6 x 41.1 x 41.9 in, the bed 83.2 x 32.1 x 18.8 in, 463 lb combined, drawing 2,700W on 110V or 220V.
It fits routines built around recovery and skin care.
Is this right for you?
You'll get the most from it if
- You want one system that adapts to table, seated, and standing sessions.
- You like choosing your own red and near-infrared wavelengths.
- You want fine control over intensity and pulsing.
- You have space for a full-body bed and will use it regularly.
Maybe look elsewhere if
- You want a simple wall or floor panel; the ReStore or ReJuvenate is more straightforward.
- You want it quickly; the Arc is made to order with about a twelve week lead time, and the Cocoon pod ships now.
Specifications
| Format | Full-body red and near-infrared bed that splits into a treatment table and a standalone panel |
|---|---|
| Wavelengths | Chosen at order from 620 to 750 nm red and 800 to 1,000 nm near-infrared |
| LEDs | 2,992 total: 1,408 in the panel and 1,584 in the bed |
| Output | Up to about 60 mW/cm² |
| Session length | 10 to 20 minutes |
| Intensity | Adjustable, with pulsing from 1 to 10,000 Hz |
| Mobility | Built-in wheels and an electric motor for repositioning |
| Dimensions | Panel 75.6 x 41.1 x 41.9 in, bed 83.2 x 32.1 x 18.8 in |
| Weight | 463 lb total: 276 lb panel and 187 lb bed |
| Power | 2,700W total: 1,250W panel and 1,450W bed, 110V or 220V supply |
| Regulatory | Manufactured in an FDA-registered facility and covered under the manufacturer's FDA device listing for red LED light therapy devices. CE, RoHS, ISO 13485, and UL certified, with EMC compliance to IEC 60601-1-2. Irradiance verified by independent third-party testing. |
| Delivery | Made to order, ships by freight, about 12 weeks |
| Included | Protective eyewear, user manual, setup instructions, power cords, controller where applicable, a complimentary wavelength and protocol consultation, and the BioLight Red Light Therapy Guide with 100+ protocols |
| Good to know | Contact us before ordering to confirm the details |
How to use
- Plan the spaceReach out before ordering so we can confirm room, power, and freight delivery
- Position itUse the wheels and motor to set up a table, seated, or standing session
- Set the sessionChoose intensity and pulsing, then start the timer
- Session10 to 20 minutes
- Frequency3 to 5 sessions a week
- Good to knowWear eye protection during sessions; individual results vary
Shipping & delivery
Free shipping within the United States on every order. Most orders ship within a few business days, and you will receive tracking as soon as your order is on its way. Larger items may ship freight with a delivery appointment.
Warranty & returns
5-year warranty.
This item is built to order and goes into production specifically for you, so it cannot be canceled or returned once production starts. Talk to us before you buy and we will confirm every detail: space, power, delivery and timing.
If anything arrives damaged, send us photos of the item, the box and the SKU within 24 hours and we will sort it out for you.
See our Return Policy for full details.
Why it earns a place in the stack. A fixed bed locks you into one position. The Arc splits into a table and a standalone panel and repositions on a motor, so a single system covers lie-down, seated, and standing sessions. Choosing the wavelengths at order lets it favor surface work or tissue further in.
Choose options
Which BioLight is right for you?
Studio and clinic systems.
| Best for | Model | Format |
|---|---|---|
| Aiming light from any angle | Adapt SystemFrom $24,900 | Table plus a 360-degree panel, 1,450 W |
| A bed that splits into a table and a panelYou are viewing | Arc System$25,000 | Convertible bed, 463 lb, 2,700 W |
| Five wavelengths in one bed | Apex System$58,000 | Bed, 794 lb, 220 V |
| Four colours in one bed | Helios System$68,000 | Bed, 794 lb, 220 V |
| Light plus PEMF, hydrogen and sound | Aether Chamber$98,000 | Multi-modality chamber, ships in 3 sections |
Every studio system is made to order, with a lead time of about 12 weeks.
Setting up at home? See the at-home panels and pod.
Frequently Asked Questions
How does the BioLight Arc bed split into two pieces?
Can I choose the wavelengths on the Arc System?
How long is an Arc session, and how strong is the light?
How big is the BioLight Arc, and what power does it need?
How long does the Arc System take to deliver?
From the Journal
Longevity Devices for Beginners: How to Build Your First Home Stack
Red Light Therapy Benefits and What the Research Supports
Cold Plunge Benefits, Safe Temperatures, and How to Set Up
Infrared Sauna Benefits and How Home Formats Compare
PEMF Therapy Explained: How It Works and What Studies Show
Light and Sound Brain Devices and What the Science Says
What Is Biological Age, and How Does Testing Work?
Build Your Own Stack
Not sure where to start? Take our Build Your Own Stack quiz. Answer a few questions and we'll map a starting point built around you, in about two minutes.
Send us your goals
We'll reply with a stack matched to your goals.
Our approach
Every product earns its place.
No single thing changes your biology on its own. What matters is the system, and whether each piece earns its place. Here is how a device makes it into Kove.
01
Start with the evidence
Where there is research behind how something works, we read it. We look at the real mechanism a device relies on, like the wavelength, the frequency, or the dose, and whether the evidence holds up. Substance comes before marketing, and we are honest about how strong that evidence is.
02
Separate mechanism from marketing
A claim is not a mechanism. We check a device's real output against its stated one: does the panel emit the 660 and 850nm it advertises, at the irradiance that makes those numbers matter? The marketing language gets set aside. The measurable spec is what we judge.
03
Verify build and dose
Even a good idea does nothing if the hardware is weak. We confirm the output is consistent, the dose is usable in a real daily routine, and the build holds up over years, because a device only helps if it lasts as long as the habit.
04
Held to one standard
What clears every step earns its place in the system, held to the same standard as everything else. That consistency is what you can count on.
